FacebookYoutube
Beads and Yarn
Line

Classes & Events

      
      

Torch Setup and Safety (online)

Friday, April 2, 2021, 10:00AM - 1:00PM PT (Pacific Time)




(place mouse over image for larger view)

Cost: $125.00

Ready to solder faster with more precision? Try oxy/propane or oxy/acetylene small torches. This class introduces students to the versatile small torch - from pencil point flames to larger flames, this power house can solder projects as delicate as chain to as large as bracelets. They can be used with inexpensive disposable tanks available at hardware stores, or small refillable tanks that are easy to store. Students practice with several projects to adapt their soldering techniques to little torches.


What is the advantage of using a torch, like an oxygen/propane or acetylene torch? 
These are the same torches used by professional jewelers for production, repair and custom work. Most of our students work with butane torches, but when we introduce them to the small torches they fall in love! Everything is faster: melting solder, soldering, annealing, etc. They can work longer without worrying about refilling the butane torch, and they can adapt the tips of the small torch to the job, from the hottest small flame to larger flames that can cover more surface area and melt up to 2 ounces of metal. These torches pack a lot of power in a small foot print. And, if you start with the disposable tanks, you can easily adapt them later to a small tank system just by changing the regulators. Just like a flex shaft makes polishing and stone setting much easier, these torches bring a whole new level of joy to soldering. 

This class will also go over more information about torches, including acetylene/air torches, using oxygen concentrators instead of an oxygen tank, and hydrogen torches (which use water to make a flame). 



 

Techniques covered:
• Review of torch options, including single tank torches, dual gas (like oxygen/acetylene and oxygen propane), and hydrogen torches

• Choosing the right torch for your studio
• Torch safety

• How to set up torches and tanks
• How to check for leaks and troubleshoot any problems
• How to use a small torch (like a Smith Little Torch or similar) with oxygen and a fuel gas (propane or acetylene)

• Practic projects to help you to adjust your soldering when using a small torch


You do not need to own a tank torch setup to take this class.

Students can take the class to learn all about the torches, so that they can make an informed decision about buying one. If you already own a torch, you can use it during class to practice. 

It’s not just a recording. You can ask questions live with your instructor.


With our Zoom online class format, students can practice during class, talk with the instructor, ask questions and get help.

 

Check out our free videos on how to set up to make jewelry at home.


This class does not include a kit of materials. Since this class is open to students with or without a hydraulic press, there is not a kit. A list of recommended materials for practice is included in the supplies list.


A full color handout is included with the class. Create your own workbook with the beautiful handout that is downloadable for this workshop. Handouts include instructions for techniques and projects, reference charts and lots of information to support your learning.


About Our Interactive Online Classes
This class is online and uses the Zoom app/website. Through Zoom, you’ll be able to see demos and follow instructions, ask questions and interact with your instructor. Zoom is easy to use and free for students to use for class, and works on most devices, like phones (iPhone, Android, etc), tablets (iPads, etc), and computers (Mac or PC). 

Your instructor is also available during free Zoom office hours for questions and help.

Each class is also recorded and available for students to watch later, to review instructions or in case you missed a class. 

Students work at home or in their studio. All of our recommended tools and the kit materials are chosen to be home studio friendly. 


Read what students have to say about our online classes on the testimonials page.


No tools are required for this class.

Since this class is open to students with or without a torch setup, supplies are optional. Students can watch the demos, decide what they want to buy, including an appropriate torch setup for a home studio, and then watch the class recording when they’re ready to practice. A pdf with a list of optional tools will be emailed to students right after they register.

If you’re going to use some of your practice pieces to make jewelry, you’ll need basic fabrication tools, like the list of tools for Jewelry 1 - the Basics.

A computer, phone or tablet to use the free Zoom app for class 

Class policies for refunds, transfers and cancelations.

 

Prerequisites:

Basic jewelry fabrication skills for precious metals, like successful completion of a basic jewelry fabrication class, like  Basic Jewelry 1 (in-person workshop) or Jewelry 1 - Basics (online). These skills include sawing, filing, soldering and finishing precious metals.

Location: Silvera Jewelry School, Berkeley, CA

Instructor: Joe Silvera

Upcoming Schedule

Date & Times
Fri. Apr 2, 10AM - 1PM PT (Pacific Time)

Register

Torch Setup and Safety (online)

Click on image for larger view