Tuesdays, September 12, 2023 - October 17, 2023; 10:00AM - 1:00PM PT (Pacific Time)
This sequel to the Jewelry 1 - the Basics course continues to build your fabrication skills with a pendant project with multiple stone settings and decorative elements.
This course is available as an in-person workshop or live online class. Please check this page for times and formats available.
Students design a custom pendant with a bail for multiple stones to be set in bezels. They will decorate their settings with a choice of twisted wire borders, silver granules, soldered overlays and wire elements.
Please note that the level 2 jewelry fabrication workshops (Jewelry 2, 3, and 4) can be taken in any order once you've completed the Basic Jewelry class (online or at our school). You can sign up for them as they become available on the schedule.
Techniques covered include:
• Design and workflow for a custom project
• Making twisted wire for decorative borders
• Melting silver into balls or granules for decoration
• Sweat soldering sheet metal overlays
• More precision soldering skills
• Fabricating a bail
• Making borders around your pendant
• Texturing without stamps or hammers
This course meets for 4 weeks, 3 hours per week, for a total of 12 hours of instruction.
A kit of materials is included with this class.
Classes at our school include use of tools, with each student having their own bench to use during class. Online students will need to have their own tools (see the list of tools below). Feel free to contact us with any questions.
A full color handout is included with the class.
Create your own workbook with the beautiful handout that is downloadable for this workshop. Handouts include instructions for techniques and projects, reference charts and lots of information to support your learning.
Tools Required for Online Students
This is a list of tools online students need to practice the techniques shown in class. (in-person students have tools to use at school)
A list of tools with links to recommended suppliers for the best prices will be sent to you after registration. If you have questions about the tool list, please contact us.
In addition to these tools, students will need most of the tools from the Jewelry 1 - The Basics course.
Check out our free videos on how to set up to solder at home and how to use a home friendly butane torch to solder, how to set up to work at home (both a simple set up and with a jewelry bench).
An old dish towel
Liquid dish soap, old tooth brush and ScotchBrite pad or similar
Permanent marker, fine tip
Glue stick or rubber cement
Honey comb block
Soldering tripod (recommended with heavy mesh screen)
Sand paper: 320, 600-grit
Fine tip permanent marker
#6/0 saw blades dozen
#2/0 saw blades dozen
Cheap household wire cutters or hard wire cutters for binding wire
Round nose pliers
Chain nose pliers
1mm drill (use with pin vise or flex shaft)
Flexible shaft machine
A computer, phone or tablet to use the free Zoom app for class
Read what students have to say about our online classes on the testimonials page.
Successful completion of Basic Jewelry 1 ( either an in person or online class) or similar experience with sawing, filing, polishing and soldering precious metals.
If a class is online, or is a combination online and in-person session, all students receive a link to a recording of the class demonstrations. In-person only workshops are not recorded. For staff instructor classes, students have access to the recordings for one year. For guest instructors, access is 30 days.
If a kit is included with the class, online students will have them mailed to them. Kits for in-person students are delivered at the beginning of the first class. More information about the kit is included with the supplies list which is emailed after registration.
International students may be charged an additional amount for shipping, because of the increased cost to ship abroad. Also, shipments to other countries may incur a tariff payable by the student. International students are welcome to contact us re: these costs and options for their materials. Please be sure that the address with your payment is the correct one for shipping.
If this class is offered online, it uses the Zoom app/website. Through Zoom, you’ll be able to see demos and follow instructions, ask questions and interact with your instructor. Zoom is easy to use and free for students to use for class, and works on most devices, like phones (iPhone, Android, etc), tablets (iPads, etc), and computers (Mac or PC).
Your instructor is also available during free Zoom office hours for questions and help.
For classes that include work time, online students work at home or in their studio. All of our recommended tools and the kit materials are chosen to be home studio friendly. Links to preferred vendors are provided in the supplies list sent after registration. Some classes, like our short demo only classes, don't require tools or materials to attend.
We remain committed to keeping everyone as safe as possible while continuing to move forward and adapt to the current circumstances for our in person classes and open studios.
In person students must show proof of vaccination. We recommend that everyone remain current with booster shots as recommended by your doctor.
Face masks are encouraged while at the school, but no longer required. Students must bring a particulate face mask (N95, KN95, KF94 or similar) to protect against dust and particles when needed and required during class work time.
If you have tested positive for COVID, have symptoms that could be COVID, or feel ill, please don't come to class. Contact us for more information.
All benches and shared tools are cleaned before and after class.
It’s recommended that students bring their own apron, safety glasses•, mask (also used for protection against fine dust when polishing), and water bottles. Filtered water is available for refills. We have aprons, safety glasses and togo cups available to use.
*Students are always required to wear safety glasses for their protection in the classroom. Be sure to choose safety glasses that fit comfortably, even over your prescription glasses.
Please visit our COVID-19 Updates page for more information.
And now the fine print. Payment in full for class fees is due at the time of registration to reserve your place. We accept Visa, MasterCard, American Express, Discover, and PayPal. Checks and cash are accepted only if you register at school. If you mail a check, your registration is not processed until it clears and the class may fill during the wait.
If the workshop is canceled by our school for any reason, all class fees will be refunded, or you can transfer to another class, or you can keep a credit on account with us for future classes or purchases,
Students can cancel, receive a credit or refund, or transfer to another class up to 21 days before a workshop, whether it is online or in person. No cancellations are accepted after the 21-day deadline, however, we will do what we can to try and sell your place to a qualified student. If we can sell your place, you can receive a refund less a $50 cancellation fee, keep a credit on account with us, or apply your fees towards a transfer to another class.
If you can’t make it to class, you may send a participant who has the necessary prerequisites in your place. Please call or email us immediately with any changes in the student participant information. If a class includes an online section, your class will be recorded and you can watch later to make up a class you miss.
Students must be at least 15 years old to attend a class, and students under 18 must have a legal guardian sign our liability waiver form. We have had younger students attend classes, on a case by case basis. If you’re interested in enrolling your child, please call or email us.
If you sign up for a class and fail to have the required prerequisites as listed in the class description, you are still subject to the 21-day cancellation policy, listed above.
Lodging and meals are not included for in person classes.
If you don't come to class, there are no refunds, credits or transfers.
|Date & Times||Register|
|Fri. Jun 23, 10AM - 5PM PT (Pacific Time),|
Sat. Jun 24, 10AM - 5PM PT (Pacific Time),
Sun. Jun 25, 10AM - 5PM PT (Pacific Time)
|Tue. Sep 12, 10AM - 1PM PT (Pacific Time),|
Tue. Sep 19, 10AM - 1PM PT (Pacific Time),
Tue. Sep 26, 10AM - 1PM PT (Pacific Time),
Tue. Oct 3, 10AM - 1PM PT (Pacific Time),
Tue. Oct 10, 10AM - 1PM PT (Pacific Time),
Tue. Oct 17, 10AM - 1PM PT (Pacific Time)