All About Saw & Solder Champlevé with Marissa Saneholtz

Saturday, May 14, 2022; 10:00AM - 5:00PM PT (Pacific Time)
Sunday, May 15, 2022; 10:00AM - 5:00PM PT (Pacific Time)

Online


Cost: $330


SOLD OUT! See below for other workshop dates.

Join Marissa Saneholtz for this exciting workshop, where students will learn how to create champlevé enamel pieces using saw and solder, and torch-fire enameling techniques - no kiln needed! Tips and tricks on how to design for this technique will be shared. The processes of sawing, soldering, wet packing, torch-firing, stoning, finishing, and soldering on findings enameled pieces will be shown. Working with opaque and/or transparent enamels, students will work to create a wearable piece of jewelry. Inspirational work made by enamelists and metalsmiths will also be shared as a starting point.

 

Techniques covered include:

  • Layout and design for champlevé
  • Sweat soldering
  • Washing enamels
  • Wet-packing
  • Torch firing enamels
  • Stoning and finishing enamel surfaces
  • Soldering on findings

 

This course is available as a live online class. Please check this page for times and formats available.

 

Tools Required for Online Students
This is a list of tools online students need to practice the techniques shown in class. 

A list of tools with links to recommended suppliers for the best prices will be sent to you after registration. If you have questions about the tool list, please contact us.

3"x3" x copper or sterling sheet - 18g 

3"x3" x copper or sterling sheet - 20g or 22g 

1’ hard silver solder 

Various colors of Opaque and/or Transparent Enamels, at least 1oz each

Fireproof area - steel sheet, tiles, etc. 

Torch: large butane, acetylene/air, propane/air, dual fuel

Striker (if needed for your torch)

Tripod with steel mesh or at least 3 fire bricks

60 mesh sifter

Mesh firing rack

Trivet

Cheap painters palette and/or plastic spoons

Small scoop or additional spoon 

20/0 fine paint brush

Alundum stone or Diapads

Copper tongs

Cross-lock tweezers

Pickle and Pickle container

Container of water for cleaning enamels or access to a sink

Soldering tweezers

Soldering pick

Third Hand

Paste flux

Brass bristle brush

3 Containers

Flux brush

Dawn dish detergent or similar

Flush cutters

Saw frame

4/0 saw blades

#2 half round hand file

Dremel or flexshaft 

Drill bits .8 or 1mm

Center punch or scriber

Set of needle files

Assorted sandpaper- 220 to 600 grit

Jewelry findings of your choice - pins, bails, ear wires, etc.

Rubber cement 

Comet or pumice powder 

Scotch brite pads

Distilled or filtered water

Safety glasses

Scissors

Particulate dust mask - at least an N95

Quart size ziploc bag 

Glossy magazine pages

Paper towels

Small eye dropper or pipette 

A computer, phone or tablet to use the free Zoom app for class

 

Prerequisites:

Basic jewelry skills such as sawing, drilling, filing, soldering, and polishing are required. A class suchas Jewelry 1- Basics will give you these skills. 

Prior enameling experience is recommended but not required. 

Instructor:

Marissa Saneholtz (Guest)

If a class is online, or is a combination online and in-person session, all students receive a link to a recording of the class demonstrations. In-person only workshops are not recorded.

If a kit is included with the class, online students will have them mailed to them. Kits for in-person students are delivered at the beginning of the first class. More information about the kit is included with the supplies list which is emailed after registration.

International students may be charged an additional amount for shipping, because of the increased cost to ship abroad. Also, shipments to other countries may incur a tariff payable by the student. International students are welcome to contact us re: these costs and options for their materials. Please be sure that the address with your payment is the correct one for shipping.

If this class is offered online, it uses the Zoom app/website. Through Zoom, you’ll be able to see demos and follow instructions, ask questions and interact with your instructor. Zoom is easy to use and free for students to use for class, and works on most devices, like phones (iPhone, Android, etc), tablets (iPads, etc), and computers (Mac or PC).

Your instructor is also available during free Zoom office hours for questions and help.

Online students work at home or in their studio. All of our recommended tools and the kit materials are chosen to be home studio friendly. Links to preferred vendors are provided in the supplies list sent after registration.

For the health and safety our staff and students, students are required to show proof of vaccination and to wear masks when attending classes at our school. If you can’t meet these requirements, we invite you to take the online version of this class instead, if available. Please visit our COVID-19 Updates page for more information.

And now the fine print. Payment in full for class fees is due at the time of registration to reserve your place. We accept Visa, MasterCard, American Express, Discover, and PayPal. Checks and cash are accepted only if you register at school. If you mail a check, your registration is not processed until it clears and the class may fill during the wait. 

If the workshop is canceled by our school for any reason, all class fees will be refunded, or you can transfer to another class, or you can keep a credit on account with us for future classes or purchases, 

Students can cancel, receive a credit or refund, or transfer to another class up to 21 days before a workshop, whether it is online or in person. No cancellations are accepted after the 21-day deadline, however, we will do what we can to try and sell your place to a qualified student. If we can sell your place, you can receive a refund less a $50 cancellation fee, keep a credit on account with us, or apply your fees towards a transfer to another class. 

If you can’t make it to class, you may send a participant who has the necessary prerequisites in your place. Please call or email us immediately with any changes in the student participant information. If a class includes an online section, your class will be recorded and you can watch later to make up a class you miss. 

Students must be at least 15 years old to attend a class, and students under 18 must have a legal guardian sign our liability waiver form. We have had younger students attend classes, on a case by case basis. If you’re interested in enrolling your child, please call or email us. 

If you sign up for a class and fail to have the required prerequisites as listed in the class description, you are still subject to the 21-day cancellation policy, listed above.

Lodging and meals are not included for in person classes.

If you don't come to class, there are no refunds, credits or transfers.

Upcoming Schedule

No upcoming occurences at this time.